I’ve been working on prepping the old window for this project for the past few weeks. It still has some work to be done, but I started roughing out the glass for the next Rainbow Row.
New Window
Tag: stained glass
Rainbow Row Window – done!
This window needed an extra coat of resin (likely could use a little more, but sometimes I go overboard). Now it’s ready to go to the SC Artisan Center, where it will be available for sale.
This is the largest Rainbow Row piece I’ve made to date at 30″ wide by 13.5″ tall.
Resin Poured on the Row
Today I poured and embellished the first resin layer on the Rainbow Row window. I used 8 ounces of resin and might need to make a second layer as this piece has a lot of depth to the details such as trees / bushes.
Next Window
I have been procrastinating on my next window project for several months. Initially I had planned on doing a larger version of Charleston’s Rainbow Row, but I wasn’t sure if it would look as good in a larger format than the other panels I’ve made with it in the past. I bought the glass I needed and then started thinking that maybe I should make another sun, or maybe a moon because I have great moon glass and great spooky sky glass.
But this morning I was asked to donate a window to an upcoming charity event and I decided to just go for it with the Rainbow Row. I won’t know how it will look until I do it, so I might as well do it and stop wondering about it. Hopefully having more room will allow me to do more decorating – trees, birds, flowers, bushes, etc. What I have so far is just rough cuts – I still need to finish the first cuts and then use the grinder to smooth / shape everything before I start with the mosaic adhesive on the first layer. I’m not sure if this will end up in the charity event auction or if another window will, but at least my procrastination is over for the time being!
SC Artisans Center
I am excited to announce that Glass of Sherry pieces are now available at the South Carolina Artisans Center in Walterboro, SC. I’m looking forward to participating in events at the Center and am honored to be associated with this amazing organization! Since 1994, this non-profit center utilizes a retail shop, interpretive displays of Southern folk-life, live demonstrations, and educational and information programs as venues to communicate South Carolina’s culture to the public. By promoting the indigenous fine crafts produced exclusively by South Carolina artists, the Center works to create a better understanding of our rich and diverse cultural heritage.
Housed in a restored eight-room Victorian cottage, the center showcases over 300 of the finest Carolina artists, emphasizing traditional and indigenous folk art and contemporary crafts.
Address: 318 Wichman St
Walterboro, SC 29488
Hours: Monday-Saturday 9 am – 5 pm
Phone: (843) 549-0011
The works above can be viewed and purchased by visiting the SC Artisan Center retail shop during it’s regular hours. I will also be participating in some of the upcoming events at the Center, held every month on the third Saturday from 10am – 2pm.
Resin time!
Rainbow Row with the resin poured and decorated. Just need to wait for it to cure now.
I had to re-adhere a couple of pieces on the other panel so I poured the resin on it another day. The “sky” is decorated with blue shell flakes and small, clear glass glitter.
Working on RRows
Every day I spend a bit of time adding some detail to these two little Rainbow Rows. I like to add trees, birds and flowers for decoration. I should go for a field trip downtown and get some inspiration for other things to add. After the mosaic adhesive dries, it will be time to add the resin coating.
Little Rainbow Rows
While I was wrapping up the placement of the smaller transom window, I took a bit of time on the side to start working on a couple of variations of small row house panels. Since I’m in Charleston, I try to make them resemble the famed Rainbow Row. I’m comparing painting on the doors and windows to using glass for those features. So far I have the larger pieces, doors and windows in place (plus a few tree trunks), and just have the fun details (trees, plants, etc.) to add before I pour the resin. I used resin spray to seal the black paint I used for the windows and doors on the top panel, as occasionally I have run into issues with it smearing when I pour the resin.
Smaller Transom – complete
Despite the snafu where I forgot to use adhesive on the main panel, the smaller transom turned out OK. It adds some cheer to our kitchen.
Smaller Transom
I decided to try adding a border around the old smaller transom window. I made a piece of backer glass that fits the space and centered the old transom insert on it, then cut some matching pink and green glass to fit around the edge. The below photo is before I glued the border glass down.
Unfortunately I just realized that I forgot to glue the backer glass to the old transom, so there will be some tricky adjustments once the border glass adhesive cures. With three layers of glass, it’s pretty hefty.