Frank Lloyd Wright – Page 3

Pattern Prep

Marking the pattern pieces with their planned colors

Before I start working with the glass, I lay out the pattern and mark each piece with the planned color to be used. In this case, white is unmarked, dark gray is colored in with a dark pencil, orange is colored orange, medium gray is marked with an “M” and light gray is marked with an “L”. I had to take my time doing this because the pattern is not symmetrical and the colors have quirky variations that are important to the overall look.

Overall view of the glass chosen, the pattern and the colored guide image.

Overview of the various shades / types of glass to be used: orange, medium gray, white, dark gray, light gray.

Now I’m working on coloring in a second copy of the pattern. One copy will be used to lay out the glass on top of as I progress through cutting the pieces while the other one will be cut up to use as guides for the individual pieces as I cut them.

It’s a BIG one!

So I had to clear off most of my work table for the pattern for this next window project. This will be going into a large window (31″ x 48″) for privacy in a powder room. We discussed the glass to be used over the weekend and settled for art glass in shades of gray, white and orange (no clear). I have to special order the clear backer glass that I will use to mount the individual pieces in place. I had considered making this with lead or copper foil, but after researching issues of strength with a window this size and discussing with my friends who will take this home, this will be a resin pour! The size will bring some challenges along with it because I will need to be able to reach all sides of it when I pour the resin, but I think it will be a fun project.

A New Project

Some friends are doing some home renovation and have asked me to make a glass panel to decorate and provide privacy in a 31″ x 48.25″ window in what is to become a new powder room. I was planning to do it with resin, but when they shared the design they chose with me, I started having second thoughts.

Waterlilies Pattern — Frank Lloyd Wright – Waterlilies

It’s actually just the top half of the pattern (in order to fit their window). When I saw all that clear glass area, I realized that it would be difficult to achieve the level of privacy they would likely desire for a big window by a toilet! I might have to dust off my soldering iron and see if I can do it with copper foil.

I’ve never made such a large panel without a solid background, and I’m pretty sure a piece this size would require some significant reinforcement. I’m also not the best at fitting pieces for a copper foil project that has to fit an exact opening, so my confidence is a bit low that I wouldn’t end up with a disaster on my hands if I did it with copper foil.

Perhaps I could use a light blue background instead of clear. Even still, the large rectangles at the bottom won’t provide a lot of privacy. I would have to use opaque glass, which I don’t believe I have on hand. I will have to think about it for awhile.