Resin – Page 17 – Sherry Glaab

Appreciating the Sunset

My Rainbow Row panels are waiting for warmer weather to get their resin coating, so in the mean time I revisited my dichroic sunset window project. I’d been stumped on what glass to use for the main sun in the center of the window, but today I made a commitment (well, at least cut out the shape even if I haven’t yet glued it in place). It was also time to sort the dichroic pieces I cut for the background by color. The sheets of dichro glass I am using are gradients of colors varying from yellow – pink – purple – blue. The pieces look like they are the same color when the light is reflecting off of the surface, so I have to use a light tray underneath to sort them out.

Once the background pieces were sorted, I laid them out in concentric rings around the sun. I still haven’t decided on how I am going to make the water beneath the sun. I started making wave shapes, but I’m starting to think I would like to use triangles, so I am putting that off for now.

Sun with rays laid out, reflective light.

I laid the concentric background pieces for the rays of the sunset out in general in yellow – pink – purple – blue order with some variation for interest. In the next three photos, I’m moving the light tray from left to right underneath the window.

I will need to fill in the top rows with some pieces cut to fit the window later on. For now I’m just getting a feel for whether this is the look I wanted. My next decision is what color dichro or otherwise glass to use to fill out the edges. I have a neat piece of dichro that is very light blue when on the light table, but has a deep red metallic tint on the reflective view.

I used some resin spray on this sheet of dichroic as the coating is unstable and could flake off when I’m cutting it. Now my work area smells like resin spray, so I called it a night. I will revisit cutting the background sheet into squares once the resin spray dries and the fumes dissipate.

I’m also still not sure I like the center of the sun being a different type of glass (non-dichroic). I want to look at it for awhile before I glue it in place.

I like the Palmettos

Today I tried adding windows and doors to a couple of the houses on these Rainbow Row pieces. I just wasn’t feeling the love for them. I’m not good with painting / drawing at all and they didn’t look the way I had hoped, so I removed them and decided to focus on the Palmetto trees today. Maybe I can add enough visual interest with plants. I glued the trees and greenery in place, but I haven’t glued the red glass flowers in the shrubs yet. Still thinking about that.

Both Rainbow Row panels with the trees glued in place.

I tried adding some flowering shrubs for visual interest.

Maybe if I make them a bit smaller next time I will like the look a little better. I still feel like these need more decoration. I have considered making windows and doors out of glass, but they would really stick out. I decided to try that and see how it looks.

In the mean time, the little trees inspired me to try designing some smaller pieces (larger than ornaments, but about a third of the size of the above pieces) with the Palmetto and Crescent for the South Carolina flag. I often have people ask about pieces with the SC flag (I’ve made large window mosaics as well as stepping stones with it in the past).

I’ll need backer glass that’s about twice this size. I’ll also likely use white and blue glass for the Palmetto and the Crescent, but this is just for brainstorming.

Adding details

Yesterday I was able to spend a little time adding some trees to the Rainbow Row panels. I haven’t glued any of the trees down yet, but I did glue the houses in place. I still want to add some doors and windows to the houses before I glue the trees in place. I think the trees will really add a lot to the panels!

Rainbow Row

Today I started a project I’ve been thinking about doing for awhile. I started with a photograph of Rainbow Row, which is a notable row of colorful homes in downtown Charleston, SC. Yesterday I cut out the clear backer glass for these panels, so today I started planning the houses themselves. I cut rectangles out of construction paper to help me determine the sizes of the glass I would need in each color.

Yesterday I set aside some glass that I thought would work well for the various colors of the houses. I don’t seem to have quite enough room to fit all of them on my rectangle bases, so I left the last two houses off for now.

Glass rectangles / roofs laid out on the clear backer glass.

Now I have to think about how much detail to add to the fronts of the houses. I’m not sure if I will paint the windows / doors / roofs or if I will leave them as is. I do plan on adding some trees, however. I’m not very good at painting, so that also factors into my decision. I might try it on the smaller panel and see how it goes.

3D Tree candle holders – reveal

I finished all three tree candle holders today – here are snapshots of the finished products. Overall, I like the tree that’s standalone (not on a rectangular base) the best. I had a hard time keeping the resin tidy looking on the rectangular glass pieces with multiple stages of pouring.

3D trees – final step

Today I was able to complete what I think is the last step in the 3D tree experiment. For the standalone tree, that was to add and decorate a base. For the two rectangular trees, it was to decorate the unfinished half. I also was able to pop the memory beads and kitty shaped mementos I made with our cat Neo’s ashes out of their molds.

The rectangular trees had quite a bit of drips on the unfinished edge, despite my efforts to prevent them. I was able to remove them with a razor blade.

Once I cleaned up the edges a bit, I laid them out on the work surface, ready to coat with a thin covering of resin.

Once the resin was in place, I sprinkled the glass chips / chunks onto it.

Next I turned my attention to the standalone tree, which needed a base of resin poured and decorated.

Resin poured and glass chunk “snow” in place inside the mold

Tomorrow we’ll see how they look! I think if I do more of these I will use colored glass for the backer that matches the tree glass instead of the clear, at least behind the tree itself. It’s hard to cover all of the possible gaps between the branches otherwise. So far I like the look of the standalone tree best, but it also has sharper edges.

Crossing fingers – 3D pour

I spent the past few days mulling over how best to pour the resin on these projects, and came to the conclusion that it would have to be in stages. Today is the first stage, which is an experiment. My plan is to coat the trees with a thin coat of resin and possibly decorate one side of each of the rectangular trees. The second stage will be (for the rectangular trees) to pour another coat on just the undecorated side and decorate. The second stage for the stand alone tree will be to pour and decorate the base that will serve as the candle stand as well as provide stability.

Projects are laid out on a silicone baking mat.

It’s cold out today and my work area is only 60 degrees F. My resin likes it to be a minimum of 70 degrees, so I used my heat gun to warm each part of the 2 part resin prior to mixing it.

I ended up elevating this one higher off the mat on top of a couple of silicone measuring containers to help me manage the drips on the edges.

After the initial coat of resin, I repositioned these two in order to decorate one side.

I continued trying to touch up bare spots and wipe off drips with my sponge on a stick. I repositioned these two and sprinkled the glass chips / chunks I am using to decorate the background and base of the tree. Above you can see the glass chips in place on the left hand piece.

Finished with one side for each rectangular tree.

I had enough resin left over to make some memory beads for our beloved cat, Neo, who passed away in November. I’m also trying some cat shaped mementos with his ashes.

In addition to scraping the drips, I periodically blew all of the above pieces with my heat gun to remove bubbles and also to warm the resin, as my working area is only 60 degrees F today!

A bit more progress

I’ve been adding a few branches / details each day to these 3D tree projects. I can only do a little at a time because the branches shift if I do more than one side at a time (3D). So one thing I am learning is that 3D is slow and you have to be patient. I’m also sort of worried that I’m adding too much – I’ll think I’m done, then I decide to add just one more branch, then I look at it some more and do the same again! Over yesterday and today I also added a glass triangle base to the two rectangular trees and planned a resin base for the triangle tree. I am planning on coating these with resin and decorating the resin with glass chips, but I’ve not quite sorted out the best order to do it in yet. Because they are 3D, I think I will need to coat the trees in stages and then pour the base last. We’ll see how it goes.

Working on 3D

It’s been a few hectic weeks here, but today I finally got the chance to work on these 3D tree experiments again. I’m trying two different approaches, one is a tree made with two clear glass triangles as the base, the other two will be rectangular. I think they would be good with a tealight candle behind them if they come out as I hope they will.

Two rectangular trees ready to go – held together temporarily with duct tape.

This is mainly an exercise in patience, as I have to glue individual branches in place and make sure they don’t drift while they are drying.

Triangular tree – I used silicone caulk to hold the two base pieces together.

I set the base up for adding layers of branches.

Turned over for the second side of the tree.

Adding layers of branches to each project, alternating to let the glue set.

First layer, second side of triangle tree.

Back to the fun stuff!

In the rush to prep for holiday sales, I got into “production” mode. Now I’m easing back into “creative” mode and revisiting some experiments I’ve been thinking about trying for a while. A few months ago, I was toying with the idea of making some small 3D trees that could be set in front of a candle. I cut some triangles from some of my old window glass and adhered them together, but didn’t feel like they were heading in the direction for success, so I set them aside. Today I decided to revisit that idea and also an idea of a two sided right angle tree on rectangles of recycled window glass. First, I cut the rectangles for the base / backer glass to about the same size.

Rectangles cut from recycled window glass.

I let the glass dictate the size of the project, so all of these items will be slightly different sizes. After cutting, I ground the edges of the glass so it won’t be sharp.

After I ground and dried the glass, I laid the pieces side by side to make sure they matched, as these will eventually be connected at a right angle for stability, and to make a space for a candle.

Making sure my pair of rectangles match.

Next I took some green glass that I cut into branch-y shapes and started laying it out on the two rectangles. I made two sets of these.

After I was satisfied with the layout of the first layer, I glued the pieces to the recycled backer glass with Mac glue. I apply the glue on the backs of the pieces with a small paint brush. The Mac glue can be watered down and still hold well.

There is a lot of glass dust on the glass pieces, so I will definitely need to clean them before I apply the resin layers later on in the process. While the glue dried on the first trees, I grabbed my mock up triangle tree and set it on a foam base so one side would be level / flat.

Another view so you can see the angle of the two triangles.

Next I started experimenting with layouts for the branches for the first side of the tree. I haven’t glued any of these down yet, though. I will wait for another day to do that step.

Branches laid out on one half of the triangle.

I’m not sure how it will go pouring the resin on this because I already connected the two triangles, but this is an experiment, so I will figure it out as I go. For the rectangles, I will try pouring each half, then adding the final layer of branches to cover the seam between the two pieces of recycled base / backer glass. That will likely require two layers of resin, as well.