craft – Page 2 – Sherry Glaab

Prepping for the Holidays

I haven’t been posting much, mostly because the dichroic window I’ve been working on has now been rethought as a sunset and it’s taking me some time to plan it. At the same time, I haven’t been doing much that is new and different, until this weekend. I decided to sign up for the Charleston Holiday Market at the N. Charleston Convention Center. It’s a big three day craft fair, held November 8-10. I usually do most of my holiday shopping at this event. This year, I’ll be a vendor!

When I was talking with another vendor at the N. Charleston Farmers Market about it last week, she suggested that I make some seasonal coasters for the event. So I decided to see what I can do. I haven’t used any really perishable / organic materials other than shells and beachy things, so plants are an expansion of my repertoire. I headed out into my yard and snipped some cheerful berries and greenery from my plants, then coated them with resin spray.

I then set about inserting my harvest into some coaster molds with resin. Hopefully they will turn out well – I read a few stories online of others’ experiences with plant based embedding and there were a lot of woeful tales of things turning brown. Fingers crossed that the resin spray helps deter that from happening. I even read that some folks use plain old hair spray instead of resin spray, which I may try when my supply of resin spray is depleted. I have two types of berries on hand, one from I believe a Pyracantha and some others from some Asparagus Fern in my yard.

Here are a couple of the first batch I made yesterday.

I like how the Boxwood looks, but it is very thick and difficult to keep small enough for the mold. I used some extra resin spray on the cypress greenery in the batches I did today to see if they hold their color any better.

Park Circle Farmers Market

I’ll be at the N. Charleston Farmers Market every Thursday in September and October (weather permitting). Come check out my booth!

Mermaid complete!

The mermaid mosaic cured enough overnight that I could bring her upstairs to snap a photo in better light. I’m pretty happy with how she turned out.

9.5″x30″ stained glass mosaic set in resin.

Mermaid background poured

This morning I was able to pour the resin and decorate the background of the 9.5″ x 30″ mermaid window.

I mixed up 16 ounces of resin, which turned out to be a good amount. I had enough left over to start the first layer of one coaster, so there really wasn’t much in the way of waste. I love these silicone measuring cups because they are reusable and there is plenty of room to stir even when you fill it to 16 ounces.

When the resin is well mixed, I started pouring it gently over the mosaic.

Once I feel like I have everything covered pretty well, it’s time to use the heat gun to remove the bubbles that form in the resin. I have been thinking about getting a craft blow torch for this because the heat gun is hard to control and can move the resin more than I would like.

Now it’s time to add the decoration to the background. For this piece, I used some tiny blue filler (which I can’t get anymore because it was discontinued, but that’s another story). After the blue filler, I added clear glass flakes to add sparkle. My sister sent me some beads and I was thinking about using some of them, but I chickened out at the last minute because I haven’t tried them yet and I’m not sure how they will look in the resin. I’ll probably try them in a coaster first, rather than a larger piece like this.

After that, I just keep an eye on the whole piece while the resin and the decorations settle down. I added a bit more of the decoration materials and touched up some spots that seemed to need a little more resin after shifting. It’s also important to check on the piece over the first hour of curing time to ensure you can remove any bubbles that form – sometimes they can be large and will detract from the look I am trying to achieve. They can be removed with the heat gun or sometimes a craft stick. Below are some up close detail photos of the window.

Mermaid almost ready for resin

Today I went back and forth on, but finally committed to (read that, glued in place) some background decoration features for the mermaid. I glued them in place because they are small and the resin might push them out of place when I am pouring it. I don’t want to be trying to make the swirls look perfect when the resin is applied, so I used some Mac glue to secure them. I might add just *one* more little blue swirl. The next step is to let the glue dry overnight. Hopefully tomorrow everything will look great and I can pour and decorate the resin background to bring it all together!

Thinking upside-down

Today was more cleanup on the window frame (I have to paint one side at a time), a bit of planning for the mermaid, and another layer in the next set of coasters. Below is actually the back side of the window. I sketched a rough outline of a mermaid I’m hoping to make before I put a coat of paint on the frame. When I’m done using the sketch as a guideline for the mosaic, the Sharpie ink will wipe right off with a wet paper towel. I also chose the glass (a blue Spectrum iridized) I want to use for the mermaid’s tail. I had to think upside down to do all of this today – the mermaid will end up facing the other direction and the coasters are built in backwards layers.

Rough outline of a mermaid drawn with Sharpie marker.

While the paint was drying on the frame, I mixed up 200 ml of resin for the next layer of decorations in the coasters. I poured a thin base layer for the coasters yesterday, so this is for layer #2. I had a little extra left over after pouring layers in 9 coasters.

For my last set of coasters, I poured the water before I added the sand background. I decided I wanted to try reversing the order and add the shells and sandy beach background first this time around.

I also wanted to try adding the white pigment at the edge of the sand where the water meets the beach, so to speak, to make it look more like the bubbles you would see when the water washes up in waves. I mixed some white pigment and drizzled it along the edge of the sand in 5 of the coasters, so I will have four without the bubbles to compare.

These will need to cure at least overnight before I can add the blue green pigmented water layer.

My least favorite thing

Today is a prep day. I have to do a little cleanup / painting on this window frame, clean up my resin measuring cups and pour a base layer of resin in my next batch of coasters before I can do the fun, creative part.

I’m thinking about doing a mermaid in this window.

When I started using resin, I used disposable cups for measuring. That seemed wasteful, so I switched over to these silicone cups that I can clean and reuse indefinitely.

I use old gift wrap to cover my work surfaces when I work with the resin.

When I’m done pouring the resin, I just leave the stir stick in place to dry for a day or two. Once the resin cures, it is easy to just pull the stick out of the cup, bringing with it any leftover resin in the bottom.

I then cut off enough duct tape to fit two fingers in and use it to pick up the rest of the cured resin from the inside of the measuring cup. It comes right off and leaves a nice, clean, ready to use surface.

In the above photo, you can see the little drops of cured resin stuck to the sides of the silicone measuring cup. Below is how it looks when I use the duct tape to remove the drops from the cup.

I decided to pour another base layer of coasters while I was at it. Now I just have to wait for the paint to dry and the resin to cure before I can continue.

Beach coasters w/pigment sea

Interestingly, the front side of the pigment didn’t distribute the same as it did on the underside. I’m still very pleased with the final outcome, and my original concern that the “water” layer should be behind the sand is now not a concern at all. I still might try it in reverse order, but I like the way the water looks like it is washing over the sand in these. I need to work on my technique to see if I can add a white layer of bubbles at the edge of the water. I can likely do this at the last step after pouring the water by adding white pigmented resin at the edge of the water. It will take a bit of practice.

Resin coasters with shells, shark teeth, sand and resin pigments – 4″ round.

Adding background

Today I added sand in another layer of resin to create the beachy background behind the shells in these coasters. I think I may need another thin layer of resin after this, maybe tomorrow if everything cures well. It also occurred to me that I should probably do the water / pigment layer last (instead of first), after the shells and sand. I’ll have to try that on the next batch.

More coasters with pigment

Today I was planning on doing some more prep work to an old window (cleaning up the wood frame / painting it) so I can use it for a mosaic. I hate doing that, so it wasn’t hard to get side tracked into making another batch of beachy coasters. My neighbor has been asking me to make some for her with the pigment as water (instead of beads / glass that I often use), so I cleared off my work surface and got creative.

For these, I poured a very thin layer of clear resin in the mold and let it sit for a while. While it was sitting, I mixed the pigments up (four different colors, three blues and one green) in separate cups. I then placed some shells and shark teeth in the resin. My sister recently sent me a bag of shark teeth (mostly found during my childhood in and around the Potomac River) to use in my projects.

I was pleasantly surprised by the way the pigment distributed itself. I didn’t get any snapshots, but I really just drizzled the pigments one at a time into the clear resin base (still tacky and not cured, but it had been sitting for probably 20 minutes). They went from squiggly / ropey designs to this! I poured some of it a bit too close to the shells, but overall I’m really happy with how the pigment looks (at least from the underside). Adding a bit more clear resin at the edge of the pigmented resin helped keep it off the shells. I will let it cure overnight before I pour the next layer and add the sand.

I covered the molds with plastic lids to keep any dust out of the resin while it cures. Hopefully in a few days I will be able to pop them out of the molds and see how they look from the top, as the view in the molds is of the bottom of the coasters.